Design of a feedback linearizing controller for a CSTR reactor

Authors

  • Ahmed Chead University of Al-Qadisiyah, Iraq
  • Ahmed Abbas Obaid University of Al-Qadisiyah, Iraq
  • Abdulrazzaq Abdzaid Hussein University of Al-Qadisiyah, Iraq

DOI:

https://doi.org/10.37868/hsd.v6i1.344

Abstract

The design of a controller for a chemical reactor was studied. Based on the input-output feedback linearization, the controller was designed for a situation where the output of the system is the concentration. The reaction in the reactor is of the first-order type. First, the reactor is modeled and presented, and then a controller for this system is designed. The control system was implemented in Simulink MATLAB. The simulation results show that the designed controller is able to control the concentration in a wide range and its performance is desirable for changing either the disturbances or the set point.

Downloads

Published

2024-01-13

How to Cite

[1]
A. Chead, A. A. Obaid, and A. A. Hussein, “Design of a feedback linearizing controller for a CSTR reactor ”, Heritage and Sustainable Development, vol. 6, no. 1, pp. 33–42, Jan. 2024.

Issue

Section

Articles