Design of microstrip coupled-line bandpass filter

Authors

  • Mubina Sasic International University of Sarajevo
  • Sehabbedin Taha Imeci International University of Sarajevo

DOI:

https://doi.org/10.37868/hsd.v3i1.55

Abstract

This project contains basic information, design, 3D projection, simulation, and analysis of Microstrip Bandpass Filter. The filter was composed of the feed lines connected to the two ports with the parallel coupled lines between them. The separation between these elements is reduced to the minimum for the purpose of reducing the error. Ultimately, the microstrip bandpass filter was designed with a 400 MHz bandwidth. We end up with these result: at the 4.43 GHz, S11 parameter is -9.868 dB and S22 is -1.808 dB, while at the 4.83 GHz, S11 is -9.995 dB and S22 is -1.826 dB.

Downloads

Published

2021-04-08

How to Cite

[1]
M. Sasic and S. T. Imeci, “Design of microstrip coupled-line bandpass filter”, Heritage and Sustainable Development, vol. 3, no. 1, pp. 44–52, Apr. 2021.

Issue

Vol. 3 No. 1 (2021)

Section

Articles

License

Copyright (c) 2021 Mubina Sasic, Sehabbedin Taha Imeci

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

This journal permits and encourages authors to post items submitted to the journal on personal websites or institutional repositories after publication, while providing bibliographic details that credit its publication in this journal.