Bow-tie patch antenna for 5G

Authors

  • Damir Avdic International University of Sarajevo, Bosnia
  • Sehabeddin Taha Imeci International University of Sarajevo, Bosnia

DOI:

https://doi.org/10.37868/hsd.v4i1.70

Abstract

The goal of this work was to design, simulate, build, and test bow-tie antenna for 5G networks. In this paper, it will be shown how the radiation pattern and input match are improving by changing angles on some points of the antenna. The first angle is from the central point of the bow-tie antenna (mark A) and another angle is from the side points of the bow-tie antenna (mark B). Bandwidth improvement is shown in the simulation between 4 GHz and 6GHz. S11, E?, E? for the nominal design are -27.31 dB, 7.39 dB, -3.30 dB respectively. After simulations, the nominal antenna is fabricated and tested with reference antenna A-info LB8180. Simulation results, testing results with fabricated antenna, and angle change results will be shown in further text.

Downloads

Published

2022-06-30

How to Cite

[1]
D. Avdic and S. T. Imeci, “Bow-tie patch antenna for 5G”, Heritage and Sustainable Development, vol. 4, no. 1, pp. 9–17, Jun. 2022.

Issue

Vol. 4 No. 1 (2022)

Section

Articles

License

Copyright (c) 2022 Damir Avdic, Sehabeddin Taha Imeci

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

This journal permits and encourages authors to post items submitted to the journal on personal websites or institutional repositories after publication, while providing bibliographic details that credit its publication in this journal.